Welcome to SICHANGO VISION TECHNOLOGY
Complete UV coating and defect detection solution for label printing, flexible packaging, and folding carton production. Pair your UV varnishing machine with the Sichango OV200 inline inspection system to catch coating defects the human eye cannot.

A core post-printing unit that coats printed substrates with UV varnish and instantly cures it under UV light, forming a transparent protective film in less than a second.
Instant cure — UV lamps dry varnish in milliseconds, ideal for high-speed production lines
Multiple finishes — full gloss, matte, spot UV, textured / ice-effect UV available
LED UV option — low-temperature curing, ozone-free, energy efficient
Laminating alternative — thinner film, compatible with subsequent hot stamping, die-cutting, slitting
Universal substrates — roll-to-roll labels, flexible packaging film, paper, self-adhesive stock
Printed web enters the coating unit from the upstream flexo or offset press.
Precision coating rollers apply an even layer of UV varnish onto the substrate.
High-power UV or LED-UV lamps instantly cure the varnish into a hard, clear film.
The OV200 vision system scans the cured web for coating defects in real time.
Good rolls are wound; defective segments are flagged, marked or automatically rejected.
The OV200 is a dedicated web inspection system designed for UV varnishing lines. It mounts directly after the UV curing station and scans the coating in real time, solving problems that human inspectors cannot reliably catch.
High-speed sync — runs at full line speed without slowing production
Industrial camera + special lighting — tuned for gloss, matte, frosted and ice-effect UV surfaces
Automatic defect marking — audible alarm, image capture, statistical reports
Rewinder integration — links to the rewinder for defect flagging, labeling or rejection
Roll-to-roll universal — works with self-adhesive labels, flexible film and paper webs
UV coating defects are often invisible at normal inspection distance. The OV200 catches them at full production speed.
Detects areas where UV varnish was not applied, partially missing, or the coating weight is too thin or too thick.
Catches microscopic air bubbles, pinholes, varnish splashes and oil spots on the cured UV surface.
Identifies scratches, foreign particles, dust and debris embedded in or on top of the UV layer.
Monitors registration of spot UV / partial coating — detects offset, overspray, edge bleed and blurring.
Detects unintended gloss level differences and tonal variation across the coating width.
Flags varnish overflow at pattern edges, smudging, and incomplete spot UV boundaries.
Stop defective output downstream. Catch UV defects before the web reaches die-cutting, rewinding or shipping — preventing massive batch waste.
Replace manual inspection. Tiny pinholes and thin varnish are invisible to the human eye at line speed. The OV200 detects them consistently.
Prevent equipment failures early. Detect coating roller, pump and UV lamp drift early — schedule maintenance before large scrap runs.
Raise yield for premium orders. Ideal for high-end labels, cosmetics packaging and pharmaceutical packaging where zero-defect output is required.
| Web Width | Up to 1300 mm (customizable) |
|---|---|
| Max Line Speed | 600 m/min (synchronized with UV coating unit) |
| Camera Resolution | High-resolution industrial line-scan camera |
| Minimum Detectable Defect | 0.1 mm (depending on optical configuration) |
| Lighting System | Special LED ring / bar lighting for gloss, matte and frosted UV |
| Compatible UV Finishes | Full gloss, matte, spot UV, texture / ice-effect UV |
| Output Signals | Alarm, defect image storage, CSV reports, rewinder / marker interface |
| Supported Substrates | Self-adhesive paper, BOPP / PET film, laminated web, folding carton board |
Talk to our engineering team about integrating the Sichango OV200 with your UV varnishing machine. We provide line survey, camera configuration and on-site commissioning support worldwide.